CRAMBA: Stony Creek

For posting trail-specific conditions and problems

Re: CRAMBA: Stony Creek

Postby PK » July 5th, 2020, 10:13 am

I got some much-appreciated help with the hand saw and the fallen tree on the Snake climb is now rideable.
It's still there, and hopefully the park will finish the job of clearing it but it's rideable now.
(You just have to roll over the small log and around the cut-off large one)

Enjoy.
Pete.
PK
 
Posts: 1041
Joined: June 10th, 2004, 12:48 pm

Re: CRAMBA: Stony Creek

Postby PK » August 30th, 2020, 11:27 am

The "OH $hit!" tree in the rollercoaster has been pushed aside. It's still partially on the trail but easily avoided now.
I asked the park to clear it, so at some point it will be removed.
Thanks to those who stopped and helped clear it.
Pete
PK
 
Posts: 1041
Joined: June 10th, 2004, 12:48 pm

Re: CRAMBA: Stony Creek

Postby PK » August 30th, 2020, 11:33 am

The builders have asked that we all stay off the new trail.
They want it to set-up a bit.
Let the rain and time pack the trail bed and the surrounding soil.

Thanks.
Pete
PK
 
Posts: 1041
Joined: June 10th, 2004, 12:48 pm

Re: CRAMBA: Stony Creek

Postby PK » September 5th, 2020, 8:33 am

I touched-up a few places in the Roller Coaster this morning.
Sand abatement and erosion repairs.
Enjoy.
Pete
PK
 
Posts: 1041
Joined: June 10th, 2004, 12:48 pm

Re: CRAMBA: Stony Creek

Postby Xtian1206= » September 5th, 2020, 4:01 pm

PK wrote:The builders have asked that we all stay off the new trail.
They want it to set-up a bit.
Let the rain and time pack the trail bed and the surrounding soil.

Thanks.
Pete
I’ve read posts talking about riding the new trail. It’s still not supposed to be ridden yet, right?


Sent from my iPhone using Tapatalk
Xtian1206=
 
Posts: 56
Joined: July 10th, 2013, 8:50 am

Re: CRAMBA: Stony Creek

Postby PK » September 5th, 2020, 8:18 pm

That's what the builders have asked.
Today I fixed the caution tape that was put in place to keep people out.
Very tempting I'll admit but give it time.
PK
 
Posts: 1041
Joined: June 10th, 2004, 12:48 pm

Re: CRAMBA: Stony Creek

Postby PK » September 7th, 2020, 8:21 am

Got out this morning and repaired the rotted section of the little boardwalk in the Pines.
Did a little trimming there while I was there.

From what I saw in the Pines, all the original trail sections should be rideable now after the overnight rain.

Please stay tay off the new stuff.
Two reasons,
1) it's officially "not open"
2) more importantly, it is freshly dug, graded and smoothed trail. It's like a sponge right now. A wet sponge.

Pete
PK
 
Posts: 1041
Joined: June 10th, 2004, 12:48 pm

Re: CRAMBA: Stony Creek

Postby c0nsumer » September 7th, 2020, 8:37 am

PK wrote:Got out this morning and repaired the rotted section of the little boardwalk in the Pines.
Did a little trimming there while I was there.

From what I saw in the Pines, all the original trail sections should be rideable now after the overnight rain.

Please stay tay off the new stuff.
Two reasons,
1) it's officially "not open"
2) more importantly, it is freshly dug, graded and smoothed trail. It's like a sponge right now. A wet sponge.

Pete


Thanks Pete, especially for that boardwalk bit. It was getting worrysome.
Steve Vigneau
CRAMBA-IMBA Treasurer

Unless otherwise stated the content of my posts are my opinion and should not be taken as the official stance of, nor representative of, CRAMBA-IMBA.
User avatar
c0nsumer
 
Posts: 7724
Joined: May 18th, 2008, 11:35 am
Location: Shelby Township, MI

Re: CRAMBA: Stony Creek

Postby ecarlsen74 » September 15th, 2020, 5:04 pm

Sorry if this isn't the right place to ask this question. I am heading out to ride some of the trails on the east side (coming from Milford) and was wondering about this "new flow section" at Stony I have heard about. Can anyone provide me some info as to where it is in relation to the regular trail? I haven't rode Stony in about 6 years. Thank you.
ecarlsen74
 
Posts: 2
Joined: September 15th, 2020, 5:00 pm

Previous

Return to Trail Conditions

Who is online

Users browsing this forum: No registered users and 9 guests