Parts clear out including Alfine di2 set!

Where individuals (non-commercial sellers) can buy or sell stuff.

Parts clear out including Alfine di2 set!

Postby AnotherFolkRider » May 31st, 2018, 7:25 pm

Parting out a bike and cleaning out the bins, everything is used but functional.

I also have a complete Shimano Alfine S705 11 speed di2 kit with drop bar shifters. Currently the hub is laced to a Velocity Aileron 700c rim, but I would be willing to sell as a hub only for the right offer. About 7000 miles on this hub, oil changes were done every 500-1000 miles with Phil Wood tenacious oil. The only issues I had with this hub is occasional dropping out of gear, but I think I never got it perfectly aligned. Someone with more patience and experience than I may be able to solve that issue. Also it periodically leaks some oil. Not consistently so I suspect it may come with weather changes. This was somewhat common with these hubs. I have the hub with a 21t sprocket laced to a Velocity Aileron rim, 170mm crankset with 39t chainring and guard, front drop bar shifters, front junction box/display, under bottom bracket junction box, 4 wires that fit a 56cm frame with some extra, a water bottle cage mount battery mount, battery and charger.


Image
Salsa Cowbell 3 42cm bar $15

ImageImage
Brooks Team Pro saddle with copper rails and rivets $65

Image
SRAM Direct Mount 32t X-Sync chainring, low mileage. Non-Boost. $15

Image
Yakima Blockhead fork mounts, $10 each

Image
Salsa Alternator 1.0 drive side plate, never used. $5

ImageImage
IS to post mount brake adapters, not sure what brand. $5

Image
Axiom Streamliner DLX Rack. Very sturdy and slim profile for gravel / touring bikes - $15 dog not included

Here's all the Alfine stuff, if you want any of it make me an offer.
Image
Image
Image
Image
Image

Everything is located in Canton, shipping charges at actual rate.
Last edited by AnotherFolkRider on August 19th, 2018, 3:20 pm, edited 15 times in total.
User avatar
AnotherFolkRider
 
Posts: 19
Joined: February 27th, 2009, 1:10 pm

Re: Parts clear out including Alfine di2 set!

Postby kmmcgrew » May 31st, 2018, 8:01 pm

PM sent on the fork.
kmmcgrew
 
Posts: 5
Joined: April 25th, 2008, 5:29 pm

Re: Parts clear out including Alfine di2 set!

Postby MetzgySS » June 15th, 2018, 6:58 pm

PM sent on CX-5's
User avatar
MetzgySS
 
Posts: 4
Joined: May 13th, 2013, 1:48 pm

Re: Parts clear out including Alfine di2 set!

Postby AnotherFolkRider » June 30th, 2018, 11:52 am

Updated with some new stuff.
User avatar
AnotherFolkRider
 
Posts: 19
Joined: February 27th, 2009, 1:10 pm

Re: Parts clear out including Alfine di2 set!

Postby AnotherFolkRider » July 22nd, 2018, 4:31 pm

Back to the top
User avatar
AnotherFolkRider
 
Posts: 19
Joined: February 27th, 2009, 1:10 pm

Re: Parts clear out including Alfine di2 set!

Postby AnotherFolkRider » August 11th, 2018, 6:44 pm

Back to the top
User avatar
AnotherFolkRider
 
Posts: 19
Joined: February 27th, 2009, 1:10 pm


Return to Classified Ads

Who is online

Users browsing this forum: No registered users and 4 guests